Is it instant geyser good for shower?
No, Instant geyser is not good for shower. Using an instant geyser for a shower is generally not recommended, and it’s also unsafe to take a shower while any type of geyser is in operation. Instant geysers are designed to provide hot water on demand, but they have limitations, especially when it comes to providing a continuous and comfortable flow of hot water for a shower.
Instant geysers have a limited heating capacity and may struggle to maintain a consistent, comfortable temperature during a longer shower. The water temperature can fluctuate, and the flow rate may not be adequate for an enjoyable shower experience. Additionally, taking a shower while the geyser is on is unsafe because it poses a risk of scalding or burning due to sudden temperature changes in the water supply. For safety and comfort, it’s advisable to use a larger storage geyser specifically designed for providing hot water for showers and to ensure that the geyser is turned off while showering to avoid any accidents.
Table of Contents
How does mechanism of instant geyser work?
The mechanism of an instant geyser, also known as a tankless water heater, operates on a simple and efficient principle to provide hot water on demand. Here’s how it works:
- Water Inlet: Cold water flows into the instant geyser from your plumbing system through an inlet pipe.
- Flow Sensor: Inside the geyser, there is a flow sensor that detects when you turn on a hot water tap, such as a shower or faucet. This sensor signals the geyser to start heating the water.
- Heat Exchanger: The geyser contains a heat exchanger, which is the core component responsible for heating the water. In most tankless systems, there are either electric heating elements or a gas burner (typically natural gas or propane).
- Electric Tankless Geyser: Electric models use electric heating elements to heat the water. When the flow sensor detects water flow, it activates these heating elements, which quickly heat the passing water as it moves through the exchanger.
- Gas Tankless Geyser: Gas models, on the other hand, use a gas burner to heat the water. The flow sensor triggers the gas burner, which heats the water as it flows through a coil or heat exchanger that is heated by the flame.
- Temperature Control: Most instant geysers have a temperature control mechanism that allows you to set the desired hot water temperature. This control regulates how much heat is applied to the water, ensuring you get the water at your preferred temperature.
- Hot Water Outlet: Once the water passes through the heat exchanger and reaches the desired temperature, it exits the geyser as hot water through a separate outlet pipe.
- No Storage Tank: Unlike traditional water heaters with storage tanks, instant geysers do not store hot water. They heat the water as it’s needed, which is why they’re called “tankless” water heaters. This design eliminates the standby energy losses associated with keeping a large tank of water hot all the time.
The instant geyser provides a continuous supply of hot water as long as there is demand and the heating elements or gas burner can keep up with the flow rate. This design makes them energy-efficient and space-saving, but it’s important to choose the right-sized geyser for your needs to ensure it can handle the demand for hot water in your home.
How is instant geyser different from storage geyser?
Instant geysers and storage geysers are two types of water heaters that differ in terms of how they heat and store hot water. Instant geysers provide hot water on demand, heating water quickly when needed, making them energy-efficient and space-saving options, ideal for smaller households or point-of-use applications. On the other hand, storage geysers heat and store a larger volume of water in advance, ensuring a continuous supply of hot water, which is suitable for larger households and commercial use. The choice between these two types depends on factors such as hot water demand, available space, and budget.
Here’s a comparative table highlighting the main differences between an instant geyser and a storage geyser:
| Feature | Instant Geyser | Storage Geyser |
|---|---|---|
| Heating Time | Heats water instantly when needed | Heats and stores water in advance |
| Water Capacity | Usually lower (typically 1-3 liters) | Larger capacity (10-50+ liters) |
| Energy Efficiency | More energy-efficient due to on-demand heating | Less energy-efficient as it needs to keep water hot continuously |
| Space Requirement | Compact and requires less space | Bulkier and requires more space |
| Installation | Typically easier and less complex | Requires more complex installation due to tank and insulation |
| Flow Rate | Limited flow rate (suitable for single point use) | Higher flow rate (suitable for multiple points of use) |
| Initial Cost | Lower initial cost | Higher initial cost |
| Operating Cost | Lower operating cost | Higher operating cost due to continuous heating |
| Maintenance | Generally lower maintenance | Requires regular maintenance |
| Suitable For | Suitable for small households or point-of-use applications | Suitable for larger households and commercial use |
| Cold Water Temperature | May not be suitable for very cold climates | Suitable for all climates |
| Persons | Suitable for 1-2 Persons | Suitable for 4-6 Persons |
| References | Click Here | Click Here |
It’s important to choose between an instant geyser and a storage geyser based on your specific hot water needs, budget, and available space. Instant geysers are efficient for small households or where hot water usage is limited, while storage geysers are better for larger families and places with high hot water demand.
What is delivery time taken by Amazon?
Generally, It takes 5-7 days for normal delivery which are almost free. And 2-3 days for Amazon Prime.
What are the install charges and other requirements
Some brand offers free installation charges or some ask around Rs 1000-1500. Please check all installation details before purchasing it or else check the product review in the review section of the product.
What happens if instant geyser is on for long time?
Leaving an instant geyser on for an extended period of time, while it’s not in use, can have several consequences:
Energy Wastage: Instant geysers are designed to heat water on demand, so when they’re continuously left on, they consume energy unnecessarily, leading to higher electricity bills.
Overheating: Prolonged operation can cause the heating element in the geyser to overheat, which might reduce its lifespan or even lead to damage.
Potential Malfunctions: Continuous operation may cause the geyser’s components to wear out more quickly, potentially leading to malfunctions or breakdowns over time.
Safety Hazards: Keeping an instant geyser on for an extended period can pose safety risks, such as overheating or potential water leaks.
To ensure the efficient and safe operation of an instant geyser, it’s recommended to use it only when hot water is needed and turn it off when not in use. This practice not only conserves energy but also extends the longevity of the appliance.
Can instant geyser burst?
Yes, instant geysers can potentially burst, although it’s relatively uncommon. This typically happens due to a malfunction, pressure build-up, or a failure in the geyser’s safety mechanisms. Bursting can release scalding hot water and cause damage, so it’s important to have your instant geyser regularly maintained and ensure that it meets safety standards to minimize the risk of such incidents. If you suspect any issues with your geyser, it’s advisable to have it inspected and repaired by a qualified technician.
Which type of geyser is safe?
Both instant geysers and storage geysers can be safe if they are installed, used, and maintained properly. Safety depends on various factors, including the quality of the geyser, installation, and user practices. Here are some safety considerations for each type:
Instant Geyser Safety:
- Instant geysers are generally considered safe when used as intended.
- Ensure professional installation to prevent water or gas leaks.
- Regular maintenance and checks for signs of wear or damage are essential.
- Proper handling of the geyser during installation and maintenance is crucial.
Storage Geyser Safety:
- Storage geysers are safe when installed correctly, ensuring proper venting and pressure release mechanisms.
- Adequate insulation can prevent burns from hot surfaces.
- Regular maintenance is important to prevent tank corrosion and leaks.
- Safeguard against overheating with thermostats and pressure relief valves.
In both cases, following manufacturer instructions, maintaining safety features, and conducting regular inspections are key to ensuring the safety of your geyser. It’s important to consider your specific hot water needs, space availability, and budget when choosing the type of geyser to best meet your requirements.
In conclusion, the choice between using an instant geyser or a storage geyser for your shower ultimately depends on your specific requirements and preferences. While instant geysers offer energy efficiency and are well-suited for point-of-use applications, storage geysers provide a consistent supply of hot water for larger bathrooms and longer showers. Consider your household’s hot water demands, climate, and budget when making the decision, and don’t hesitate to consult with a professional for expert guidance. Whichever option you choose, a reliable geyser can enhance your daily bathing experience while optimizing energy consumption.
If you want to get notification as an alarm at your watch then check smart watches under 1000 here.
